Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Color | Yellow, Black |
Sierra
Angle kit for Ford Sierra 65 degrees
€1,250.00 exc. tax
Angle kit for Ford Sierra based on conversion of the suspension from BMW E36.
This kit include:
1x Stencils for drilling tower struts
2x Camber plates
2x FAT E36 knuckle
2x FAT E36 arms
2x Tie rods
2x Sierra/E36 arms rear mounts
2x Steering rack adapters
1x Ackermann kit (32 locking plates)
1x Subframe Sierra/E36
The angle kit is based on the suspension conversion from BMW E36, it requires the use of wheel hubs,
steering rack and coilovers from the BMW E36.
With this subframe, you can easily match the suspension with the BMW E36.
Subframe fits body without modification. The subframe has the same engine mounts as
factory part from Ford Sierra.
The rear arm mounts are bolted to the factory mounts of the sway bar mounts from Ford Sierra.
The set does not require welding or very invasive modification of the car structure.
The only forced modification is drilling holes in the tower struts using the our stencils.
With order wi give photo instruction.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.